Support and Resistance (Barry) indior
1 2 3

thread: Support and Resistance (Barry) indior

  1. #1
    Junior Member Cefelina's Avatar
    11

    Support and Resistance (Barry) indicator

    Hello

    the re-paints the previous three bars. Specifically, when a support or resistance level is drawn, this degree seems on the 3rd ster on that level's start. It paints this candle using a blue/red dotpaints and paints the 2 previous candles .

    I'd love to edit this indior so that it comprises an AUDIO ALERT, if a new support/resistance degree first seems (on the start of the 3rd blue or red dot/candle). I just need the alert to noise once, in the exact same time as the 3rd (support or resistance) ster appears.

    If anyone can help, I'm quite grateful.

    Thanks a lot
    https://www.cliqforex.com/attachment...2037381012.mq4

  2. #2
    Junior Member jeferoxr's Avatar
    11
    I would just have it quit scanning bar 3 or 2. This will provide the fractal time before drawing on on the line to settle out.

    If the alert go when a new lineup is shaped?
    Hey Mag,
    Probably what Jim outlined in the first post.

    MG

    I would like to edit this indior so that it comprises an AUDIO ALERT, when a new support/resistance degree first appears (on the open of the 3rd blue or red dot/candle). I only want the alert to noise once, in the specific same time as the 3rd (support or resistance) dot appears.

  3. #3
    Junior Member jeferoxr's Avatar
    11
    Hi

    the Service and Resistance (Barry) indior re-paints the last three pubs. Specifically, as soon as a support or resistance level is drawn, this level seems on the ster on that level's start. It then paints paints the two previous candles , and this candle with a dot .

    I'd love to edit this indior so that it includes an AUDIO ALERT, when a new support/resistance degree first seems (on the start of the 3rd blue or crimson dot/candle). I just need the alert to seem once, at the exact same moment as...
    Hey Jim,
    If this comes to fruition please let me know I use this indior daily. I will be happy to go in with you and contribute to a paypal account.

    Thanks..Mike G

    P.S.. Why don't you post this at the Metatrader Programmer Discussion

  4. #4
    This is most likely do to the indior utilizing the fractals, if you see how fractals pulls, it's founded on the low or high, if a new low or high is shaped on the next candle it will only move it on to this candle.

    It's likely to produce the indior ignore the last few candles in an effort to get it to stop shing the lines.

  5. #5
    Junior Member jeferoxr's Avatar
    11
    that is probably do to the indior utilizing the fractals, if you watch how fractals pulls, it is founded on the low or high, if a new low or high is shaped on another candle it will only move it on to this candle.

    It is possible to produce the indior ignore the last few candles in an attempt to get it to stop moving the traces.
    Hi Magnum,
    What would you charge to do this? Alert and alternative.

    Thanks..MG

  6. #6
    I would have it stop scanning 3 or bar 2. That will give the time before drawing on on the line, to settle out.

    If the awake go every time a new lineup is formed?

  7. #7
    Found some advice on how ifractals is calculated...

    Fractal Technical Indior it is a string of at least five consecutive bars, together with the highest HIGH in the middle, and two reduced HIGHs on either side. The reversing set is a string of at least five bars, together with two LOWs on either side, which correlates to the fractal, and the LOW in the middle. The fractals are have High and Low values and are indied with the up and down arrows.
    The Investor/RT Fractal indior relies upon the Bill Willi Fractal in the book Trading Chaos by Bill Willi, PhD. A fractal is a entrance technique that's traditionally defined as a bar which has two preceding and two following bars with lower highs (or lower highs, on a down movement).

  8. #8
    Junior Member el_spen's Avatar
    21
    Hello

    the Service and Resistance (Barry) indior re-paints the last three pubs. Specifically, as soon as a support or resistance level is drawn, this degree seems on the open of the 3rd ster on that degree. It then paints paints the two previous candles , and this candle with a dot .

    I'd love to edit this indior in order that it comprises an AUDIO ALERT, if a new support/resistance degree first seems (on the open of the 3rd blue or red dot/candle). I only need the alert to sound after, in the specific same moment since...
    Hello jimbil ,

    how can you use this indior ?

    Thanx
    e.g.

  9. #9
    Junior Member javieroyo's Avatar
    11
    Hi there,

    I've looked for a barry indior with alert anyplace. Any improvement on that alert when a new fractal paints?

    Best of pips

  10. #10
    Junior Member lasq111's Avatar
    17
    Hi all,

    here is your Support and Resistance (Barry) indior together with the added alerts. I have added a few features. The core logic behind the alert routine is obtained from .

    Here is a short explanation of what the new variables do:

    ShowChartAlerts
    If this is set to true, it is going to permit the audio with text alarms in addition to the email alarms.

    AlertEmailSubject
    This ends an email for this as the topic. You have to setup your email first if you want to use this attribute. To login your MetaTrader terminal, then go to Tools Options Email Tab. Leave it blank if you don't want to use this attribute.

    BarCount
    I have added a barcount limitation so it will not plot this indior into each and every bar in history and consume every pc memory you've got. This manner wills operate more smoothly. Growing the BarCount will allow the indior to plot farther into history.

    SignalAtBlueDot
    This represents at which blue dot provides a service alert be sent out. Default value is set at 3, so it will send an alert if the 3rd dot is detected. It usually means it will send out an alert when the blue dot is detected if you place it . The first poster requests this attribute.

    SignalAtRedDot
    This represents at which red dot will a resistance alert be sent out. Default value is set.

    ShowDotsOnScreen
    If this is set to true, it is going to send a screen message into the top-left hand corner of your chart. Informing you of the current no. Of red and blue dots.
    https://www.cliqforex.com/attachment...1729285313.mq4

  •